TILE Adhesive Super 20kg off white ( wet area ) TILEFIX

Characteristics:

• Super Tilefix is a premium grade grey cement based tile adhesive.

• It is designed for bonding all types of ceramic, stone and mosaic tiles, onto rigid concrete, render, rendered brickwork, and block work surfaces.

• It can be used internally or externally on wall and floor surfaces.

• Super Tile fix can be used for fixing low porosity tiles.

• Super Tilefix can be used for tiling in immersed situations like pools and spas when used with RLA Uniflex Additive.

• Do not use Super Tilefix for moisture sensitive stone like green marble. 

Preparation:

• Ensure all concrete slabs are allowed to cure for at least 6 weeks and have a wood float finish.

• All rendered surfaces must be allowed to cure for at least 7 days prior to commencing tiling.

• Ensure all surfaces are sound, dry and free from movement, oil, dust, grease, wax, curing compounds, release agents and any other loose contaminating materials.

• Steel trowelled finished concrete surfaces must be mechanically or chemically abraded prior to commencing tiling.

• The maximum variation in the plane of the concrete must not exceed 5mm in 3 meters for floors and 4mm in 2 meters for walls.

• It is recommended that all surfaces must be primed with Uniprime, especially porous surfaces, to ensure a sound bond of the adhesive to substrate.

• When applying the primer onto floor surfaces it is recommended to firstly pour some primer in a section then spread the primer using a brush or roller. Continue this method of application until the entire area is primed.

• Allow the primer to dry for approximately 30 - 40 minutes at 20°C prior to commencing tiling.

• Any excess Uniprime that has not dried should be removed with a rag prior to tiling.